Zhengzhou Jinghua Industry Co.,Ltd.
Jinghua Casts The Quality, The Quality Wins The World
Add to Cart
Sweet Potato Starch Slurry Desand Equipment Processing Production Line
Desand hydrate cyclone is mainly used in removing sand ,mud from starch slurry, cassava slurry ,potato slurry after crushing.It is widely used in
corn starch processing ,cassava starch and cassava flour processing wheat starch processing ,sago processing ,potato starch processing .
Advantages of desand equipment
1. There are a variety of models, according to the needs of customers to provide the best solution.
2. Using high technology, the removal rate of starch is greater than 98%.
3. Reasonable structure of desand machine, more conducive to water saving.
Working principle
Desand equipment is used to desand material based on the theory of centrifugal separation .Because of the water inlet pipe installed on the
eccentric position of the cylinder , when water goes into water inlet pipe through cyclone sand , firstly form downward surrounding fluid along the
surrounding tangential direction and move down round . Water current turns upward rotation along cylinder axis as reaches a certain part of the
cone. Finally water discharges from the water outlet pipe . The sundries fall into bottom conical slag bucket along the cone wall under the force of
fluid inertial centrifugal force and gravity . The cone bottom has components to prevent sundries from rising up. The sundries can outflow under
the water current effect as long as you open the manual valve when the sundries in the slag bucket reaches a certain extent.
Main technical parameters
| Model | Material | Capacity(m3/h) | Feed Pressure(MPa) | Sand Removal Rate |
| CSX15-Ⅰ | 304 or nylon | 30-40 | 0.2-0.3 | ≥98% |
| CSX15-Ⅱ | 304 or nylon | 60-75 | 0.2-0.3 | ≥98% |
| CSX15-Ⅲ | 304 or nylon | 105-125 | 0.2-0.3 | ≥98% |
| CSX20-Ⅰ | 304 or nylon | 130-150 | 0.2-0.3 | ≥98% |
| CSX20-Ⅱ | 304 or nylon | 170-190 | 0.3-0.4 | ≥98% |
| CSX20-Ⅲ | 304 or nylon | 230-250 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅰ | 304 or nylon | 300-330 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅱ | 304 or nylon | 440-470 | 0.3-0.4 | ≥98% |
| CSX22.5-Ⅲ | 304 or nylon | 590-630 | 0.3-0.4 | ≥98% |
There are four steps to making starch
1. Cleaning:To remove the stone sand and from the raw materia.
2. Crushing :To destroys the fiber structure and makes the starch particles free.
3. Separator:To removing sand ,mud from starch slurry, degreasing, microslag separation, protein separation, washing and concentration of all
kinds of starch and modified starch emulsion.
4. Drying and Packing:To dehydrator the wet starch, sifter and packaged.
On the afternoon of June 6th, One Belt And One Road Cambodian delegation came to visit zhengzhou jinghua industrial co., LTD. Professor wang
yanbo, chairman of zhengzhou jinghua company and other relevant personnel introduced to the delegation the achievements made by jinghua
company over the years, the production technology of products and the production process of starch. The delegation visited the company's office
building, production workshop and finished product warehouse, showing the delegation the company's production and research capabilities.
1. After consulting with customers, we can provide customers with detailed product parameters and drawings, listen to customers' needs, and engineers can customize products according to customers' needs;
2. After signing the contract with the customer, actively solve various problems for the customer, communicate with the engineer and the customer in time, design and modify the scheme until the customer is satisfied, check the production progress, manufacture the equipment as soon as possible, find the appropriate transportation mode, and ensure the goods can be delivered safely and on time.
3. After the installation and commissioning of the equipment, we will visit the customers regularly to understand the problems in the production and actively solve the problems for the customers. Therefore, the equipment has a one-year warranty period, and we can solve the after-sales problems through the on-site guidance of telephone and video.
Q1: Can you provide detailed parameters and drawings of the equipment?
A: Yes, you can contact us by email, we will provide you with the detailed parameters and drawings of the equipment.
Q2: How long is the warranty period of the equipment?
A: After the successful installation and commissioning of the equipment, there is a one-year warranty period.
Q3: What kind of after-sales service do you provide?
A: Provide after-sales service for customers through telephone, video guidance, on-site maintenance, etc.
Q4: Are your products can be assured ?
A: Our machines are all passed ISO9001:2001 and have CE certificate by SGS, TUV.
Q5: If we show you our layout of factory, can you help us to design the whole process line?
A : Yes, our experienced engineers and technical employees can help you to arrange the layout and installation of whole process line based on your real situation;
Q6: If we have samples of new products, can you help us to analysis and design the machine?
A: Yes, Our technical department can help you to analysis, design and test the new products you offered.